The decoration of the exterior wall is easy to be ignored this is very bad for the wall, so it is recommended that you pay special attention to the decoration, whether indoor or outdoor, only in this way the decoration of the house will be both inside and outside repair, and the decoration effect will be good, next, we together to understand what the skill of outdoor decoration?
1, when decorating, polystyrene board the plane of the deviation is less than 5 mm, it is also a very reasonable size. When beyond the limits of tolerance, highlight the surface of the wall was fixed by the ministry of polishing and concave (if the thickness is greater than 6 mm, the use of 1:3 cement mortar to ensure that the entire wall roughness on the 5 mm, Yin and Yang Angle are square.
2, grasp the construction mortar preparation. Special adhesive mortar and crack on the surface of polymer mortar. This helps to use it for a long time. In the construction process, the use of a hand-held electric mixer, mixing or (or manual shaking) binding mortar viscosity of water: mortar = 1:5, mixing with water at the same time; Mixture of 25 minutes, stirring time should be enough, even, medium consistency, and has a certain viscosity.
3, according to the understanding of the structure, once the mortar is completed, should let it stand for 5 minutes, and there was time to relax. Stir before use, preparation of slurry should be in 1 small, when in use. According to the structure, the positioning line (central or lateral line) in parts of the EPS components is installed in the pop-up. According to the drawing of installation size cutting EPS components. EPS component has all the standard sizes, cutting seam width should be considered.
